Pololu 12V Step-Up/Step-Down Voltage Regulator S10V2F12

Price: $4.94
Product prices and availability are accurate as of 2019-07-19 00:09:34 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

This micro sized step-up/step-down voltage regulator is perfect for supplying 12v power (from a higher voltage source like 4s or 5s Lipo or even a lower voltage like 2s or 3s) to your FPV gear that needs specifically 12v power. Power 12v flight cameras, LED lights or other gear that can only run on 12v.

This switching regulator uses the SEPIC topology to produce 12 V from input voltages between 2.5 V and 18 V. The wide input range coupled with its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 12 V. The compact (0.4? × 0.575?) module can supply over 200 mA in typical applications.

Features
  • Input voltage: 2.5 V to 18 V (can be higher than, the same as, or lower than the 12 V output)
  • Fixed 12 V output with 4% accuracy
  • Typical continuous output current: 200 mA (Up to 300 mA on 4s battery)

Product Features

Input voltage: 2.5 V to 18 V (can be higher than, the same as, or lower than the 12 V output) Fixed 12 V output with 4% accuracy Typical continuous output current: 200 mA (actual continuous output current depends on input voltage; see Typical Efficiency and Output Current section below for details) <2 mA typical no-load quiescent current Integrated over-temperature shutoff, Small size: 0.40? × 0.575? × 0.1? (10 mm × 15 mm × 3 mm)

Write a Review